Installing optional trays – Lexmark 280 User Manual

Page 35

Advertising
background image

Installing optional trays

The printer supports up to three optional input sources: an optional 550-sheet tray, an optional 2,000-sheet tray, and

an optional 550-sheet specialty media drawer. Instructions for installing an optional input source are the same for

each.

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You

must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an

input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies,

and faxes, you may need additional furniture. For more information, see

www.lexmark.com/multifunctionprinters.

Note: The C736n, C736dn, and C736dtn model printers support a total of four optional input sources. The C734n,

C734dn, C734dtn, and C734dnw model printers support a total of three optional input sources.

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more

trained personnel to lift it safely.

CAUTION—SHOCK HAZARD: If you are installing an optional tray after setting up the printer, then turn the

printer off and unplug the power cord, the USB cable, and the Ethernet cable before continuing.

1

Unpack the optional tray, and remove all packing material.

2

Place the tray in the location chosen for the printer.

Note: If you are installing more than one optional tray, the 2,000-sheet tray must always be installed as the first

optional tray (configuring from the bottom up).

Note: The optional 550-sheet tray and the optional 550-sheet specialty media drawer are interchangeable.

Additional printer setup

35

Advertising
This manual is related to the following products: