Linksys E1000 - Manual (Page 25)

22 Wireless-N Router
Linksys E1000 Chapter 3: Advanced Configuration
WPA Personal
NOTE: If you are using WPA2 or WPA, each
device in your wireless network MUST use the
same WPA method and shared key, or else the
network will not function properly .
Wireless Security > WPA Personal
Passphrase Enter a passphrase of 8-63 characters . The
default is password .
WEP
WEP is a basic encryption method, which is not as secure
as WPA .
NOTE: If you are using WEP encryption, each
device in your wireless network MUST use the
same WEP encryption method and encryption
key, or else your wireless network will not
function properly .
Wireless Security > WEP
Encryption Select a level of WEP encryption, 40/64 bits
(10 hex digits) or 104/128 bits (26 hex digits) . The
default is 40/64 bits (10 hex digits) .
Passphrase Enter a Passphrase to automatically generate
WEP keys . Then click Generate .
Key 1 If you did not enter a Passphrase, enter the WEP
key manually .
RADIUS
This option features WEP used in coordination with a
RADIUS server . (This should only be used when a RADIUS
server is connected to the Router .)
NOTE: If you are using WEP encryption, each
device in your wireless network MUST use the
same WEP encryption method and encryption
key, or else your wireless network will not
function properly .
RADIUS
RADIUS Server Enter the IP address of the RADIUS server .
RADIUS Port Enter the port number of the RADIUS
server . The default is 1812 .
Shared Secret Enter the key shared between the Router
and the server .
Encryption Select a level of WEP encryption, 40/64 bits
(10 hex digits) or 104/128 bits (26 hex digits) . The
default is 40/64 bits (10 hex digits) .
Passphrase Enter a Passphrase to automatically generate
WEP keys . Then click Generate .
Key 1 If you did not enter a Passphrase, enter the WEP
key manually .
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes .