Linksys E1000 - Manual (Page 34)

31 Wireless-N Router
Linksys E1000 Chapter 3: Advanced Configuration
Add a New Game
QoS > Add a New Game
Enter a Name Enter any name to indicate the name of
the entry .
Port Range Enter the port range that the game will be
using . You can have up to three ranges to define for this
bandwidth allocation . Port numbers can range from 1 to
65535 . Check your application’s documentation for details
on the service ports used .
Select the protocol TCP or UDP, or select Both .
Priority Select the appropriate priority: High, Medium
(Recommended), Normal, or Low .
Click Add to save your changes . Your new entry will appear
in the Summary list .
MAC Address
QoS > MAC Address
The MAC address of the computer you are using is
displayed .
Enter a Name Enter a name for your device .
MAC Address Enter the MAC address of your device .
Priority Select the appropriate priority: High, Medium
(Recommended), Normal, or Low .
Click Add to save your changes . Your new entry will appear
in the Summary list .
Voice Device
QoS > Voice Device
Enter a Name Enter a name for your voice device .
MAC Address Enter the MAC address of your voice
device .
Priority Select the appropriate priority: High
(Recommended), Medium, Normal, or Low .
Click Add to save your changes . Your new entry will appear
in the Summary list .
Summary
This lists the QoS entries you have created for your
applications and devices .
Priority This column displays the bandwidth priority of
High, Medium, Normal, or Low .
Name This column displays the application, game,
device, or port name .
Information This column displays the port range or
MAC address entered for your entry . If a pre-configured
application or game was selected, there will be no valid
entry shown in this section .
Remove Click this button to remove an entry .
Edit Click this button to make changes .
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes .