LG STB1000 - Manual (Page 42)

42 206-4147
Installer Menu
Typical STB1000 Installer Menu
Use the Installer Menu to set up or change operational settings.
Refer to the table starting on the next page for brief descriptions of Installer Menu
items. More detailed descriptions follow the table listing.
Accessing the Installer Menu
1. Make sure the STB1000/display panel is ON.
2. Using the Installer Remote, press MENU repeatedly until the on-screen
setup menus lock up, and then press 9-8-7-6 + ENTER to access the
Installer Menu.
The Installer Menu opens with item 000 INSTALLER SEQ 000.
Using the Installer Menu
Items 000 ~ 119 are accessible only upon entering the Installer Menu.
Refer to the table on pages 43 and 44 for an overview of Installer Menu
items, including item numbers, functions, ranges, and default values.
Installer Menu items not relevant to the STB1000 are not present on the
Installer Menu; therefore, some numbers are missing. For example, item
006 will not appear.
Navigation within the Installer Menu
Use the Up/Down arrow keys on the Installer Remote to sequence through
the available menu items, or access an item directly by keying in the line
number and then pressing MENU. For example, to access the SLEEP
TIMER option, which is item 015, press 0-1-5 + MENU.
Changing Installer Menu Settings
To change an Installer Menu item setting, use the Left/Right arrow keys on
the Installer Remote, or enter a value directly. Press ENTER to save the
new setting, or use the Up/Down arrow keys to navigate to a new Installer
Menu item if you have additional items to edit.
Exiting the Installer Menu and Activating Updates
After you have adjusted all required Installer Menu item settings, press
ENTER once on the Installer Remote to save your changes; then, press
ENTER again to exit the Installer Menu. Any changes you make will be
stored in non-volatile memory.
LODGING PTC INSTALLER MENU
000 INSTALLER SEQ 000
UPN 000-000-000-000 ASIC 20E7
PTC V1.00.00 STB V3.00.00