LG LFA840 - Manual (Page 10)

10
Setting the Clock
1.
Press for at least 2 seconds: 2.
Choose from either:
AM 12:00 (for an am and pm dis-
play) or 0:00 (for a 24 hour display)
3. Confirm your selection: 4. Select the hours: 5. Press: 6. Select the minutes: 7. Press:
ON PLA
YER
CLOCK
.
/ >
SET
.
/ >
SET
.
/ >
SET
Playing music using USB
NOTES : • Some portable devices are not compatible with this system. •
When various cards are connected to the Memory Card Reader
, the first
detected card is recognized.
• Do not extract the USB device during operation. •
If you use a USB extension cable or USB hub, the USB device might not be recognized.
•
A
device using NTFS file system is not supported (Only the F
A
T
(16/32) file
system is supported.).
•
The USB function of this unit does not support all USB devices.
•
Digital camera and mobile phones are not supported.
•
This unit is not supported when the total number of files is 1000 or more. The advantage of connecting your portable USB player through the system’
s USB port is that the portable device can be controlled from the
system.
1.
Connect the portable player to the
system using a USB cable (not supplied):
2.
Select the USB function:
The dis-
play will show READ, followed by the number of files displayed.
3. Select the folder : 4. Start the USB playing: 5. T
o
stop a USB playing:
6.
Before disconnecting the portable
USB player
, change to any other
function by pressing:
7. Remove the USB player:
ON PLA
YER
ON REMOTE
FUNC.
BB
/ []
xx
FUNC.
INPUT
FOLDER•PRESET
BB
/ []
xx
FUNCTION
or
INPUT
Use your player as an alarm clock
Press and hold
TIMER
on the player for two seconds. Each function,
TUNER,
CD, USB flashes for two seconds. Press
SET
on
the player when the function
you want to be woken by is showing. If you choose
TUNER you will be shown the stations you have saved as pre-
sets. Use
.
/
>
on
the player to select the station you want, then press
SET
on the player
.
Y
ou will be shown the ON
TIME display
.
This is where you set the time you want
the alarm to go of
f. Use
.
/
>
on
the player to change the hours and min-
utes and
SET
on the player to save.
Y
ou will then be shown the OFF
TIME display
.
This is where you set the time
you want the function to stop. Use
.
/
>
on
the player to change the hours
and minutes and press
SET
on the player to save.
Next you will be shown the volume (VOL) you want to be woken by
. Use
.
/
>
on
the player to change the volume and
SET
on the player to save.
Switch the system of
f.
The clock icon shows that the alarm is set.
When the system is turned of
f you can check the time the alarm is set for by
pressing
TIMER
on the player
.
Y
ou can also turn the alarm on and of
f by press-
ing
TIMER
on the player
.
T
o
set the alarm to go of
f at a dif
ferent time, switch the
system on and reprogramme following the same steps as initially
.