LG LDF8812WW - Manual (Page 4)

4
S S
A AF FE ET TY Y A AN ND D C CA AU UT TIIO ON N
Installation
W WA AR RN NIIN NG G
The dishwasher is designed
for standard household
current (120 Volts AC, 60 Hz.)
Before connecting the
dishwasher, ensure the outlet
or cable is properly fused and
grounded.
Not being grounded may
cause breakdowns or
electric shocks.
Do not damage the power
cord itself or place heavy
objects on the cord.
Power cord damage may
cause fire and electric
shock.
Do not grasp the power cord
or switch with wet hands. Do
not use a damaged power
cord, plug or socket.
It may cause electric
shock.
Disassembly or repair should
be conducted by experienced
service persons.
Improper disassembly or
repair could head to product
failure or electrical shock.
Do not install or store the
dishwasher where it will be
exposed to the weather.
It may cause an electric
shock, fire, malfunction
and deformation.
WARNING
Electrical Shock Hazard
Not following these instructions can result
in death, fire or electrical shock.
The dishwasher MUST be grounded.
Connect the ground wire to green ground
connector in terminal box.
Do not use an extension cord.
WARNING
Tip Over Hazard
Do not put excessive downward force on the
open door prior to installation as this could
cause damage to the unit or cause it to tip over.
The dishwasher should not be used before
installation has been completed in accordance
with the instructions in the installation manual.
SAVE THESE INSTRUCTIONS
For a permanently connected dishwasher:
This appliance must be connected to a grounded metal, permanent wiring system or an equipment-
grounding conductor must be run with the circuit conductors and connected to the equipment-grounding
terminal or lead on the appliance.
Not observing these instructions may result in serious injury or death.
SAFETY
AND
C
AUTION