LG LDF8812WW - Manual (Page 9)

9
FUNCTIONS
O
F
C
ONTROL
PA
NEL
HALF LOAD
• In case of a small load, use just
the upper or lower rack to save
energy.
• Each press of the Half Load
button cycles between upper
rack only and lower rack only.
• If you don't press Half Load,
the dishwasher runs normally,
i.e, operation of upper and
lower spray arms alternate
periodically.
CHILD LOCK
• Locks the control buttons
during cycle operation to
prevent the settings from
being changed during
operation.
• To lock/unlock, press
Spray and Rinse
buttons simultaneously
for 3 seconds with door
open.
SANITARY/
EXTRA RINSE
• Repeated pressing of the Rinse button
will select Sanitary( ), Extra
Rinse( ) or both.
• If you select the Sanitary Function,
the Sanitary Light blinks when the
water temperature meets the sanitary
temperature level. and steadily
illuminated at the end of cycle when
the sanitary temperature level has
been met to achieve sanitization.
• When you select Extra Rinse, an
additional rinse cycle is added.
SPRAY
(INTENSITY)
• Repeated pressing of the
Spray button will select
Strong( ), Medium( )
or Soft( ).
DELAY START
• If you want to delay the start of
a selected program, press the
Delay Start button.
• Each press of Delay Start will
delay the start of the cycle by
one additional hour.
• The delay start time can be
adjusted from 1 to 24 hours in
one-hour increments.
POWER
• Pressing the POWER button
turns on power to the control.
• After the cycle is complete, the
power automatically switches
off after 4 minutes for safety
and economy.
• If there is an unusual Power
surge or disturbance, the power
will be automatically turned
off for safety and the cycle will
have to be started over.
NOTE This high temperature rinse sanitizes dishware and glassware in accordance with NSF/ANSI Standard 184 for
Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments.