Lennox Hearth M5390 - Manual (Page 7)

5
English
4.1 4.5
4.6
4.7
4.8
4.2
4.3
4.4
3.4 Place headset in charge
cradle and charge for a minimum
of 30 min. before use. A full
charge takes about 2 hours.
Visual indicator on headset will
flash green while headset is
charging, and light steady green
when fully charged. The same
procedure is to be followed when
using the travel charger.
3.5 Turn on headset by pressing
Answer/End button for 1 sec.
(visual indicator will flash blue
four times and headset will beep
three times), or by placing headset
in charge cradle. Turn off headset
by pressing Answer/End button
for 2 sec. (visual indicator will
flash blue four times and headset
will beep three times).
3.4
3.5
3.8
3.6
Clear dial tone
3.6 Take headset out of charge
cradle and put it on.
3.7 Lift handset from telephone
and listen for a dial tone in headset.
3.8 If dial tone is missing or unclear,
slowly slide the clear dial tone
switch on bottom of base unit
through the 3 settings.
3.9 Set switch to the position
that gives the clearest dial tone.
4.1 4.5
4.6
4.7
4.8
4.2
4.3
4.4
3.1
3.2
3.3
3.4
3.5
3.1
3.2
3.3
3.4
3.5
2 sec
5.1
5.2
5.3
5.4
4.1 4.5
4.6
4.7
4.8
4.2
4.3
4.4
3.7
3.9