LG RD-JT41 800X600 SVGA - Manual (Page 23)

DLP Personal Projector 19
Shutdown
1. Press POWER and a warning message will appear. To turn off the
projector, press POWER again.
2. The fan will continue to run for approximately two minutes.
3. Turn off the ON/OFF switch.
4. Disconnect the power cord from the wall socket.
Caution
• Please do not unplug the power cord before POWER is shut down or
during the two-minute cooling process.
• If the projector is not properly shut down, to protect the lamp, the sys-
tem will detect this and cool the lamp for two minutes automatically
before turning on again.
I
Projector
Remote Control