Panasonic RR-US950 - Manual (Page 20)

RQT9124
20
Each time you press REPEAT , the
playback style is switched as
follows.
Repeat play/Successive play
ALL → ALL → No display →
“ALL” display
The selected file until
the last file in the selected folder are
played successively. The unit stops
when the playback finishes. (The
factory setting is “ ALL”.)
“ALL ” display
Plays all files in the
folder repeatedly.
The display changes to “ ”
(lighting) and repeat play starts.
Cancelling A-B Repeat:
Press REPEAT or u, i while playing or the unit is stopped.
(Cancel cannot be done using i while playing last file in the folder.)
Press REPEAT for 1 second or longer
while playing.
1
A-B Repeat play
Playback repeats between the start point (A)
and finish point (B) if those points are set.
* You cannot set A-B Repeat in the following cases.
• Within 1 second from the beginning of the file
and within 2 seconds from the end of the file
• Less than 2 seconds between the start point
(A) and finish point (B)
* When only the start point (A) is set and playback
continues until the end of the file, the end becomes
the finish point (B) and A-B Repeat begins.
* During A-B Repeat playback, skip to the
Index point (➜ page 22) and the Slight return
playback (➜ page 19) are not available.
The start point (A) is set
and “ ” (blinking) and “ ”
(lighting) are displayed.
REPEAT
Repeat play/Successive play, A-B Repeat play
No display
When the playback for one file
finishes, the unit stops.
“ ” display
Plays one file repeatedly.
• Select one of the above settings
and, press q/g to start playback.
Press
REPEAT
at the finish point (B). 2
ALL
ALL