Setting the time, Preparation, When “ ” is blinking – Panasonic RR-US950 User Manual

Page 7

Advertising
background image

RQT9124

7

•FOLDER/

MENU

STOP

After the battery is inserted, “

” blinks on the display when the time is not set (e.g. at the time of

purchase). (After approx. 1 minute, the display changes to “

” (blinking) in Hold off condition.)

The clock is used for preserving recording date and setting timer recording. Please set the time first.

Recording is possible even if the clock is not set. However, the Recording date, Recording start time is displayed as “

”.

When the time display is

” (blinking) or you

change the time

*

Press

STOP

to stop the setting process

midway.

*

The clock operates with the monthly

loss/gain of 60 seconds at normal

temperature.

*

The time setting is cleared, if the battery

has been consumed completely.

When “

” is blinking

• Switch Hold off (➜ page 6).

• Press

STOP

to stop the unit.

Press +, – to set the year and

press q/g to enter.

Set month and day in the same way.

1

Year

Month

M D

Day

M D

Press u, i to select the time

display and press q/g to enter.

2

12-hour display

24-hour display

Press +, – to set the time and

press q/g to enter.

You can adjust the time quickly by

pressing and holding +, –.

3

• Switch Hold off (➜ page 6).

12-hour display

24-hour display

1. Press and hold

•FOLDER/

−−MENU

until the

menu screen is displayed.

” (blinking) or “

” (blinking)

is displayed.

2. Press +, – to select year display

**” and press q/g to enter.

If “

” blinks, press q/g to enter.

3. Follow step

1

,

2

and

3

shown at left.

Setting the time

Preparation

Advertising
This manual is related to the following products: