Perlick Keg Couplers Tapping Equipment User Manual

Keg couplers, Retrofit empty keg sensor, Cleaning adapters

Advertising
background image

Retrofit Empty Keg Sensor

Existing Perlick single valve keg couplers can be retrofitted
to function as Smart Couplers. Simply replace the probe
with Perlick’s No. 40125 empty keg sensor. Bulk-packed.
Weight: 8 oz. each

Part No.

Description

40125 ...................................For domestic kegs
40119 ...................................For imported kegs

Cleaning Adapters

Single and dual cleaning
adapters are uniquely
designed to operate
when Perlick’s keg cou-
pler is in the untapped
(handle up) position,

allowing the system to be cleaned from the faucet through
the keg coupler. Prevents solution from entering the CO

2

line, eliminating beer contamination when retaping. Brass
nickel plated (Bulk Packed)

Part No.

Description

43657* .................................Single/domestic kegs
43681* .................................Dual/domestic kegs
43659* .................................Series/domestic kegs
43699 ...................................Single/imported kegs
43702 ...................................Dual/imported kegs

*Note: These adapters are designed to be used with all Perlick single
valve couplers and most competitor’s couplers. Must be used with Smart
Couplers when cleaning lines from the faucet through the Smart Coupler.

Lo-Boy Coupler for Single
Valve Domestic Kegs

Uniquely constructed to tap a keg

in limited space. Just push down
and twist to tap.

Part No.

Description

40030 ............................Lo-Bo

KEG COUPLERS

Perlick Smart Couplers

Keeps beer loss to a minimum

Speeds service on keg changeovers

Minimizes overfoaming

The patented Perlick Smart Coupler* combines an integral
Empty Keg Sensor with a quality keg coupler to eliminate
the need for wall-mounted FOB devices. It senses when a
keg is empty and shuts off the beer flow, yet leaves the line
fully charged with beer. This prevents gas from entering an
empty line causing excessive foaming when tapping a
fresh keg. Packed 25 per case. Weight: 1 lb. 8 oz. each

Part No.

Description

26000F* ...............................For Domestic Kegs
27500F.................................For Imported Kegs

*U.S. Patent #5,630, 441

Universal Empty Keg Sensor

Controls the amount of beer loss by closing off the beer
flow when a keg empties. Mounts directly to the keg
coupler for dual probe or imported kegs.

Part No.

Description

43739 ...................................Universal empty

keg sensor

No. 26000F

No. 43739

No. 43657

No. 43681

No. 43659

Single

Dual

Series

Adapter

Adapter

Adapter

Advertising