Pioneer XM2GO - Manual (Page 42)

Troubleshooting
If this happens: You should:
inno does not communicate with your PC. Check the power and USB connections between the dock and your PC.
Be sure to use the supplied USB cable; any others may prevent your
inno from charging or communicating properly with your PC. Remove
your inno from its dock station, then re-insert.
Artist and song title information does not inno may not correctly show the artist and song information
display correctly. (ID3 tags) of certain foreign songs.
You cannot transfer songs that you inno is not compatible with Napster To Go’s monthly subscription
downloaded with Napster To Go™ into inno. service. To transfer songs from your PC to your inno, you must
purchase individual songs or albums from XM+Napster Light or
XM+Napster.
Customer Support
Customer Support 83 Customer Support 82
Customer Support
Specifications
inno Player
Dimensions 56 mm (W) x 94 mm (H) x 16 mm (D)
2.2 in (W) x 3.7 in (H) x 0.6 in (D)
Weight 128 g
4.5 oz
Storage capacity 1 GB (The capacity of the built-in memory may be less than
indicated; a portion of the memory is used by the inno
firmware.)
Music file formats MP3 and WMA fixed bitrates:
32, 48, 64, 96, 128, 160, 192, 256, 320 kbps
MP3 and WMA variable bitrates:
64-128, 128-256, 160-320 kbps
Audio output 3.5 mm mini-stereo jack
Antenna connector (home and car dock) RF SMB
Battery Type: lithium ion
Voltage: 3.7 V
Capacity: 1750 mAh
External power Voltage: 5 V DC
Current: 2000 mA
Polarity:
PostScript Picture
(polarity.eps)
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 82