Panasonic DMR-EX78 User Manual

Page 66

Advertising
background image

66

RQT9088

Changing the unit’s settings

List of TV Reception Channels

System Update

In order to update this unit’s software, the TV Guide download,
and to support system changes made by broadcasts, this unit
periodically performs software updates.
Press [OK] to show the following settings.

≥Update data and TV Guide download information is sent by an

unscheduled digital broadcast. In order to receive these updates,
you must be able to receive digital broadcasts.

≥An update will take approximately 60 minutes. While the update

is in progress, “SW-DL” appears on the unit’s display. You cannot
operate the unit until the update is complete. Removing the AC
mains lead while the update is in progress may damage the unit.

≥TV Guide download will take approximately 60 minutes. While

the TV Guide download is in progress, “GUIDE” appears on the
unit’s display. The TV Guide download can be interrupted by
switching on the unit.

TV Guide Download in Standby

[On]

When you set this unit to standby mode, TV Guide data
is downloaded automatically.

[Off]

Software Update in Standby

[On]

When you set this unit to standby mode, software
updates are downloaded automatically.

[Off]

TV Guide/Software search period

Selects the time to automatically perform TV Guide download
and updates when the unit is set to standby mode. This can only
be set when “TV Guide Download in Standby” and “Software
Update in Standby” is set to “On”.

≥If there is a programmed recording set for the time you have

selected, the programmed recording will be given priority.

[Automatic]

The unit will give priority to searching for TV
Guide download and update data at midnight.

[02:00–06:00]

[06:00–10:00]

[10:00–14:00]

[14:00–18:00]

[18:00–22:00]

[22:00–02:00]

Software Update Search Now

Start the search for new software manually.
A new software version is announced by a message. Do not turn
your unit off during the update. This could result in the loss of
data. A message shows that the update has finished.
If a new software version is not going to be broadcast for the next
few days, a corresponding message also appears.
≥If applicable update data is found, press [2, 1] to select “Yes”

and press [OK].

Initialize

≥Press [OK] to show the following settings.

Shipping Condition

All the settings except for the ratings level, ratings password and
clock settings return to the factory preset. The timer recording
programmes are also cancelled.

[Yes]

[No]

Default Settings

All the settings other than the tuning settings, clock settings,
region settings, disc language settings, ratings level, ratings
password, remote control code, return to the factory presets.

[Yes]

[No]

Tuner

System

Channel

Coverage

VHF

UHF

CATV

PAL–B

Australia

Analogue

0–12

28–69

45 MHz to

470 MHz

DVB–T

Australia

Digital

6–12

27–69

DMREX78&88GN-RQT9088-L_eng.book 66 ページ 2008年4月1日 火曜日 午後6時38分

Advertising
This manual is related to the following products: