How to use the on screen menu, Input signal status, Picture adjusting knob status – Panasonic BT-LH1700WP User Manual

Page 10: Menu display

Advertising
background image

10

Three types of information are displayed on the screen. The input signal status, picture adjusting knob status, and
the menu display.

1. The selected input line (

J page 7, )

VIDEO, Y/C, SDI1, SDI2,

YP

B

P

R

/RGB-VIDEO/RGB-COMP.

2. Signal format

The display status can be set in “STATUS

DISPLAY” in the “SYSTEM CONFIG” menu

(

J page 18).

If “UNSUPPORT SIGNAL” is displayed, then either

the current input signal is not supported or the
“INPUT SELECT” menu setting needs to be
changed.

When “NO SIGNAL” is displayed, there is no input

signal.

Note:
“UNSUPPORT SIGNAL” and “NO SIGNAL” may not be
displayed correctly.

Picture adjusting knob (

J page 7, )

This knob can be rotated and pushed.
The status display appears when the knob is

pushed.

The display disappears when the knob is pushed
again, or if the knob is not operated for 10 seconds.

Settings can only be adjusted in the status display.
The display position can be changed (

J page 18

“ROTARY POSITION”).

Status display:
PHASE, CHROMA, BRIGHT, CONTRAST

Note:
The volume knob status display is not displayed on the
screen.

This is displayed when the menu is used.
The display disappears if remains idle for 2 minutes.
The display position can be changed (

J page 18

“MENU POSITION”).

Input signal status

1

Picture adjusting knob status

Menu display

MENU

Displays the operation explanation for the
menu button.

How to Use the On Screen Menu

Advertising