Maintenance inspections, Specifications, 28 specifications – Panasonic BT-LH1700WP User Manual

Page 28

Advertising
background image

28

Maintenance inspections are necessary for the user to use this equipment safely. It is important to keep monitor
functions in good condition at all times through periodical and appropriate maintenance. In order to use this monitor
for a long time, and to make full use of all of its functions, be sure to carry out the following maintenance
inspections.

1. Necessity of periodical maintenance services

A backlight is used in the liquid crystal panel. This
part (consumable) deteriorates as time passes, and
can cause performance levels to drop, or may cause
a malfunction.
Therefore, in addition to the after-service repairs
performed if a malfunction occurs, it is essential that
general servicing and maintenance servicing are
conducted on a regular basis, to prevent malfunctions
and accidents caused by the deterioration of
consumable parts, and to keep the monitor working
normally.

2. Standard maintenance time guidelines and items

to be performed
The following maintenance performance times give
standard guidelines for when to perform maintenance,
and do not indicate the individual lifespan of your
equipment. Also, note that the deterioration time
varies depending on the usage environment and way
in which the equipment is used.

* You cannot replace just the backlight unit on its own.

Specifications

g General
Input power

is the safety infomation.

Dimensions:

• Including stand

430 (W) mm x 323.5 (H) mm x 198 (D) mm
[16.9 (W) inches x 12.7 (H) inches x 7.8 (D) inches]

• Main body only, not including stand

430 (W) mm x 309 (H) mm x 81.1 (D) mm
[16.9 (W) inches x 12.2 (H) inches x 3.2 (D) inches]

Weight:

• Including stand

8.1 kg (17.9 lb)

• Main body only, not including stand

7.2 kg (15.9 lb)

Operating temperature:

+5 °C to +35 °C (+41 °F to +95 °F)

Operating humidity:

20 % to 80 % (no condensation)

Storage temperature:

-20 °C to +60 °C (-4 °F to +140 °F)

g Panel
Size:

17.1 type

Aspect ratio:

15:9

Number of pixels: 1280 x 768 (WXGA)
Display colors:

Approx. 16,700,000 colors

View angle:

176° up/down, 176° right/left

g Input Connectors
Image signal input:

VIDEO:

1 line, BNC x 2
(1 connector with through-out configuration)

Y/C:

1 line, Y/C connector x 2
(1 connector with through-out configuration)

Analog component:

1 line for YP

B

P

R

/RGBS, BNC x 8

(4 connectors with through-out configuration)
However, when input is RGB-COMP. this becomes
BNC x 5 (R, G, B, HD, and VD).
(Through-out is not available)

SDI:

2 line, BNC x 3
(1 connector with switched-out configuration)

Audio input:

Pin jack x 2 (stereo)

GPI:

D-SUB, 9 pins x 1

RS-232C:

D-SUB, 9 pins x 1

DC input:

XLR, 4 pins x 1

g Signal level
VIDEO

EXT SYNC signal level:

0.3 Vp-p to 4.0 Vp-p

HD/VD signal level:

TTL level

AUDIO

AUDIO input level:

0.5 Vrms

Speaker output:

0.5 W + 0.5 W

Part name

Quantity

Periodic maintenance

inspection time

Backlight

and liquid
crystal panel

1

Replace every 50,000

hours

*

Fan

1

Replace every 10,000
hours

AC:
DC:

Power supply:
100 V – 240 V, 50/60 Hz
12 V (11 V – 17 V)

Power consumption:
1.1 A – 0.6 A
4.5 A

Maintenance Inspections

Advertising