Panasonic BT-LH2600WE - Manual (Page 35)

35
Specifications
g General
Input power
is the safety infomation.
Dimensions:
• Including stand
663 (W) mm x 456.1 (H) mm x 270 (D) mm
[26-3/32 (W) inches x 17-31/32 (H) inches x
10-5/8 (D) inches]
• Main body only, not including stand
663 (W) mm x 441.5 (H) mm x 114 (D) mm
[26-3/32 (W) inches x 17-3/8 (H) inches x
4-1/2 (D) inches]
Weight:
• Including stand
17.5 kg (38.58 lb)
• Main body only, not including stand
15.0 kg (33.07 lb)
Operating temperature:
+5 °C to +35 °C (+41 °F to +95 °F)
Operating humidity:
20 % to 80 % (no condensation)
Storage temperature:
-20 °C to +60 °C (-4 °F to +140 °F)
g Panel
Size: 26 inches
Aspect ratio: 16:9
Number of pixels: 1366 x 768 (WXGA)
Display colors:
Approx. 16.77 millions colors
View angle: 176° up/down, 176° right/left
g Input Connectors
Image signal input:
VIDEO:
1 line, BNC x 2
(1 connector with through-out configuration)
Y/C:
1 line, Y/C connector x 2
(1 connector with through-out configuration)
Analog component:
1 line for YP
B
P
R
/RGBS, BNC x 8
(4 connectors with through-out configuration)
However, when input is RGB-COMP. this becomes
BNC x 5 (R, G, B, HD, and VD).
(Through-out is not available)
SDI:
2 line, BNC x 3
(1 connector with switched-out configuration)
Audio input: Pin jack x 2 (stereo)
GPI: D-SUB, 9 pins x 1
RS-232C: D-SUB, 9 pins x 1
g Signal level
VIDEO
EXT SYNC signal level: 0.3 Vp-p to 4.0 Vp-p
HD/VD signal level: TTL level
AUDIO
AUDIO input level: 0.5 Vrms
Speaker output: 0.5 W + 0.5 W
g SDI EMBEDDED AUDIO
HD - SDI: Compliant with SMPTE299M
Sampling rate:
Compatible with 48 kHz, synchronous/asynchronous
Compatible with 8 ch
SD - SDI: Compliant with SMPTE272M
Sampling rate:
Compatible with 48 kHz, synchronous
Compatible with 4 ch
AC:
Power supply:
100 V – 240 V, 50/60 Hz Power consumption:
1.5 A – 0.6 A