Connecting a tv, Connecting up, Chapter 2 – Pioneer BDP-LX08 User Manual

Page 14

Advertising
background image

02

14

En

Chapter 2

Connecting up

Connecting a TV

Be sure to turn off the power and unplug the power cord from the
power outlet whenever making or changing connections.

Note

• Make the settings in the Setup Navigator menu according to the

type of cable connected (page 20).

Connecting using a commercially
available HDMI cable

The audio and video signals can be transferred to HDMI-compatible
devices as digital signals with no loss of sound or video quality. After
connecting, make the settings at the

Setup Navigator menu

according to the connected HDMI-compatible device (page 20).

Also refer to the operating instructions of the device being
connected.

Note

• The HDMI indicator on the player’s front panel lights when an

HDMI-compatible device is connected. (Depending on the
connected device, in some cases it may only light when the
player is selected as the device’s input.)

• 1080p video signals may not be output, depending on the HDMI

cable being used.

Caution

• Hold the plug when connecting and disconnecting the cable.

• Placing a load on the plug could result in faulty contact and no

video signals being output.

About HDMI

This player incorporates High-Definition Multimedia Interface
(HDMI™) technology.

The player supports Deep Color.
The conventional players can transmit a video signal with 8 bit color
depth in the YCbCr 4:4:4 or RGB formats, the players supporting
Deep Color can transmit a video signal with a color bit depth of
greater than 8 bits per color component. Subtle color gradations
can be reproduced when connected to a TV that supports Deep
Color.

HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.

R

R

AUDIO OUT ( 2 ch )

AUDIO OUT ( 7.1 ch )

VIDEO OUT

HDMI OUT

DIGITAL

OUT

CONTROL

IN

L

L

Y

PB

PR

FRONT

OPTICAL

COMPONENT

VIDEO

SURROUND

CENTER

VIDEO

S-VIDEO

SUB WOOFER

SURROUND BACK

AC IN

HDMI OUT

P

B

P

R

COMPONENT

S VIDEO

Player’s rear panel

TV

Match the direction of
the plug to the terminal
and insert straight.

To HDMI input terminal

HD

MI
c

a

bl

e

(com

mer

c

iall
y a
vailable

)

It is also possible to
connect to an AV
receiver or amplifier
using an HDMI cable
(page 17).

Direction of
signal flow

LX08_WV_EN.book 14 ページ 2008年7月15日 火曜日 午後2時51分

Advertising