Making settings using the setup navigator menu, Getting started, Chapter 3 – Pioneer BDP-LX08 User Manual

Page 20: If the setup navigator menu is not displayed

Advertising
background image

03

20

En

Chapter 3

Getting Started

Making settings using the
Setup Navigator menu

Be sure to perform these settings when using the player for the first
time.

Caution

• Before turning on the power, check that the connections

between the player and other devices are correct.

1

Turn on the power.

Press

STANDBY/ON.

2

Turn on the TV’s power and switch the input.

See the TV’s operating instructions for instructions on operating the
TV.

Check that the

Setup Navigator menu is displayed.

If TV Control is set, the TV can be operated with the player’s remote
control (page 22).

If the Setup Navigator menu is not
displayed

Press

HOME MENU to display the Home Menu, select

Initial Setup

Setup Navigator Start, then press ENTER.

3

Select the OSD language.

Use

/ to select, then press ENTER.

When you have this player connected to a Pioneer Flat Screen TV
that is compatible with HDMI Control, language settings are
imported from the Pioneer Flat Screen TV’s language settings before
Setup Navigator begins.

4

Select and set the video and audio output terminals.

Select the actually connected video and audio output terminals.

Use

/// to select, then press ENTER.

• When

HDMI is selected for Video or Audio, proceed to step 5.

• When

Component Video is selected for Video, proceed to

step 6.

• When

S-Video/Video is selected for Video, proceed to step 7.

Caution

• When

HDMI is selected for Video, no video signals are output

from the

COMPONENT VIDEO, S-VIDEO or VIDEO output

terminals.

• When

Component Video or S-Video/Video is selected for

Video, no video signals are output from the HDMI OUT
terminal.

• The video and audio signals output from the set output terminals

are output synchronously (lip synchronization).

• Linear PCM audio signals (2 channels) are output from all

terminals other than the ones selected for

Audio, regardless of

the audio format or the player’s settings.

STANDBY/ON

OPEN/CLOSE

TV CONTROL

INPUT

SELECT

CH

VOL

TOP MENU

TOOLS

HOME

MENU

RETURN

ENTER

Setup Navigator

BD PLAYER

Please select the on-screen display language.

Audio, subtitle and BDMV/DVD-Video menu

language will also be set.

Setting item

Output terminal name

Vid
e

o

HDMI

HDMI Output

Component Video

Video Output

Component Video

S-Video/Video

S-Video

Video

Au
di

o

HDMI

HDMI Output

Digital Audio

Digital Audio
Output

Optical

Analog Audio

Audio Output (2 ch)

Audio Output (7.1 ch)

TOP MENU

TOOLS

HOME

MENU

RETURN

ENTER

Setup Navigator

BD PLAYER

Select the output terminals to be used for

the video and audio signals of this player.

Use [ ][ ] to select video or audio, then

press [ ][ ] to select the output terminal.

HDMI

HDMI

Video

Audio

LX08_WV_EN.book 20 ページ 2008年7月15日 火曜日 午後2時51分

Advertising