Pioneer BDP-LX08 User Manual
Page 53
53
En
07
Digital audio signals are not
output from the
DIGITAL
OUT (OPTICAL) terminals
(analog audio signals are
output).
Is
Audio Out set to audio formats supported by the connected
AV receiver or amplifier?
• Read the operating instructions of the connected AV receiver
or amplifier and check the supported audio formats.
• Set
Audio Out properly (page 41).
Noise can be heard when
outputting DTS Digital
Surround signals.
Is the connected AV receiver or amplifier compatible with DTS
Digital Surround?
If an AV receiver or amplifier that is not compatible with DTS
Digital Surround is connected to the
DIGITAL OUT terminal,
set
DTS Out to DTS
PCM. Noise will be heard if DTS Out is
set to
DTS (page 41).
192 kHz or 96 kHz digital
audio signals cannot be
output from the
DIGITAL
OUT (OPTICAL) terminals.
It is not possible to output 192 kHz or 96 kHz digital audio
signals from this player’s
DIGITAL OUT (OPTICAL) terminals.
The signals are automatically converted to under
96 kHz for output.
Secondary audio or
interactive audio is not
output.
Is
HDMI Audio Out properly set?
Set
HDMI Audio Out to PCM (page 42).
Are
Dolby Digital Out and DTS Out properly set?
Set
Dolby Digital Out to Dolby Digital 1, DTS Out to DTS 1
(page 41).
Sound is fast or slow.
When an HDMI cable is connected, are audio signals being
output from devices connected with cables other than HDMI
cables?
When this player is connected by HDMI cable to a Pioneer AV
receiver or amplifier compatible with the PQLS function via
HDMI connection, the PQLS function is activated when playing
a music CD (CD-DA). Because of this, the sound output from
components other than the ones connected by HDMI cable
may be fast or slow. If this happens, set
PQLS to Off (page 42).
Files recorded on discs
cannot be played.
Is the disc one that is playable on this player?
Check whether the disc is one that can be played on this player
(page 7).
Is the file one that is playable on this player?
• Check whether the file is one that can be played on this
player (page 9).
• Check whether or not the file is damaged.
Is the file protected by DRM?
Files protected by DRM cannot be played (not including DivX
VOD files).
A message indicating low
memory (local storage)
appears while playing a BD-
ROM disc.
Erase the BDMV data (page 24).
Problem
Check
Remedy
LX08_WV_EN.book 53 ページ ２００８年７月１５日 火曜日 午後２時５１分