PMC-Sierra PM7347 User Manual

Pm7347, Features, Applications

Advertising
background image

PMC-990996 (R2)

PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE

ã 1999 PMC-Sierra, Inc.

PM7347

PMC-Sierra,Inc.

SATURN User Network Interface for J2/E3/T3

S/UNI-JET

FEATURES

• Single-chip ATM User Network

Interface (UNI) operating at 44.736
Mbit/s, 34.368 Mbit/s, and 6.312 Mbit/s
conforming to ATMF-95-1207R1,
ATMF-94-0406R5, and
AF-PHY-0029.000.

• Provides on-chip DS3, E3 (G.751 and

G.832), and J2 framers. Can be
configured for use solely as a framer.
When configured in framer mode,
gapped transmit and receive clocks
can be generated for interfaces that
need access only to payload data bits.

• Supports bypass of the internal

framers and supports connections to
an arbitrary-rate external transmission
system interface up to a rate of 52
Mbit/s. This lets the S/UNI-JET be
used as an ATM cell delineator.

• Implements ATM direct-cell mapping

into T1, DS3, E1, E3, and J2
transmission systems according to
ITU-T Recommendation G.804.

• Provides a SCI-PHY and 50 MHz

UTOPIA Level 2 compatible 8- or
16-bit ATM-PHY Interface.

• Implements the Physical Layer

Convergence Protocol (PLCP) for T1
and DS3 transmission systems
according to the ATM Forum UNI
Specification and ANSI
TA-TSY-000773, TA-TSY-000772, and
for E1 and E3 transmission systems
according to ETSI 300-269 and ETSI
300-270.

• Implements the ATM physical layer for

broadband ISDN according to ITU-T
Recommendation I.432.

• Uses the PM4341 T1XC, PM6341

E1XC, PM4351 COMET, and framer/
line interface chips for T1 and E1
applications.

• Provides seamless interface to the

VORTEX DSLAM chipset,
S/UNI

®

-ATLAS, and

S/UNI-RCMP-200.

• Provides programmable

pseudo-random test pattern
generation, detection, and analysis
features.

• Provides integral transmit and receive

HDLC controllers with 128-byte FIFO
depths.

• Provides performance monitoring

counters suitable for accumulation
periods up to one second.

• Provides an 8-bit microprocessor

interface for configuration, control, and
status monitoring.

• Provides a standard 5-signal P1149.1

JTAG test port for boundary scan
board-test purposes.

• Low power 3.3 V CMOS technology

with 5 V-tolerant inputs.

• Available in a high density 256-pin

SBGA package (27 mm by 27 mm).

• Rated for industrial temperature

operation.

APPLICATIONS

• DSLAM Uplinks
• Enterprise ATM/PPP Uplinks
• ATM or Frame Relay Switches,

Multiplexers, and Routers

• DS3/E3/J2 PPP Internet Access

Interfaces

• DS3/E3/J2 Frame Relay Interfaces

TXCP_50

Transmit

CCPM

PLCP/cell

TRAN

J2, E3 OR DS3

Line

FRMR

J2, E3 or DS3

Line

XBOC

Receive

TDFR

Receive

Transmit

1/2 TTB

Transmit

SPLT

Transmit

ATM and

PLCP

Framer

ATMF/SPLR

Receive

ATM and

PLCP

Framer

TXFF

Transmit

RXCP_50

Receive

RXFF

Receive

4-Cell

MPIF

Microprocessor

System

RCLK

RPOS/RDAT

RNEG/RLCV/ROHM

TCLK

TPOS/TDATO

TNEG/TOHM

1/2 TTB
Receive

PMON
Perfor-
mance

RFDL

Receive

RBOC

Receive

Receive

O/H

RO
H

RO
H

C

LK

RO
H

F

P

TO
HI

NS

TO
H

TO
HC
LK

TO
H

F

P

R

C

ELL

A[

10:
0

]

ALE

CS
B

WRB

RD
B

IN

TB

D

[7:

0]

RS
T

B

SI

G R

1

SI

G

R

5

SI

G R

4

SI

G R

3

SI

G R

2

PR

GD

BER

IEEE

P1149.1

TDO

TC
K

TDI

TMS

TRS

T

B

S

IG

T

1

SI

G T

2

SI

G

T

3

SI

G

T

4

SI

G T

5

S

IG

T

7

S

IG

T

6

DTCA

TDAT [15:0]
TPRTY

TSOC
TCA

TADR [2:0]

TENB
TFCLK

PHY_ADR[2:0]

ATM8

RFCLK
RENB
RADR [2:0]
RCA
RSOC

RPRTY
RDAT [15:0]
DRCA

SIG T1: TPOHINS
SIG T2: TPOH/TDAT
SIG T3: TIOHM/TFP/TMFP
SIG T4: TICLK
SIG T5: TPOHCLK
SIG T6: TPOHFP/TFPO/TMFPO/TGAPCLK/TCELL
SIG T7: REF8KI

SIG R1: FRMSTAT
SIG R2: RPOCHCLK/
RSCLK/RGAPCLK
SIG R3: REF8KO/
RPOHFP/RFPO/RMFPO
SIG R4: RPOH/ROVRHD
SIG R5: LCD/RDATO

BLOCK DIAGRAM

Advertising
Table of contents