Panasonic KX-TG5932AL - Manual (Page 43)

Multi-unit Operation
43
1
Press {SELECT} repeatedly to display
the desired handset number. i
{
CALL}
L
The handset beeps for 1 minute.
2
To end the intercom call, press
{
CALL}.
Answering an intercom call
1
Press {C} to answer the page.
2
To end the intercom call, press {OFF}.
1
Press {CALL} to answer the page.
2
To end the intercom call, press
{
CALL}.
Note:
L When the ringer volume is set to off, the
handset or the base unit rings at the low
level for intercom calls.
Transferring calls
between handsets,
conference calls
Outside calls can be transferred between 2
handsets. 2 handsets can have a
conference call with an outside party.
1
During an outside call, press
{
INTERCOM} to put the call on hold.
2
To page another handset, enter its
extension number ({1} – {4}).
L { 4} can be used if you have 4
handsets.
3
Wait for the paged party to answer.
L If the paged party does not answer,
press {C} to return to the outside
call.
4
To complete the transfer, press {OFF}.
L
The outside call is being routed to
another handset.
To establish a conference call, press
{
Conf}.
L
To leave the conference, press
{
OFF}. The other parties can
continue the conversation.
L
To put the outside call on hold, press
{
HOLD}. To resume the conference,
press {Conf}.
Base unit
Handset
Base unit
Available model(s):
KX-TG5932/KX-TG5933/KX-TG5934
TG593xAL.book Page 43 Tuesday, April 11, 2006 10:31 AM