Step 2: preparing the speakers, Assembling the front speakers, Connecting the speaker cables – Panasonic Blu-Ray Disc Home Theater Sound System SC-BTT 190 User Manual
Page 11
Getting s
tar
te
d
11
VQT3X51
STEP 2: Preparing the speakers
1
Attach the stand to the base.
2
Tighten the 3 screws (supplied) securely.
3
Attach the speaker.
4
Tighten the screw (supplied) securely.
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
Attach the speaker cable sticker (supplied) and connect the speaker cables to the speakers.
e.g., Surround speaker
Assembling the front speakers
[BTT196] [BTT195]
Thread the
speaker cable
through the
base.
Slide the
speaker
cable into
the groove.
Leave the
space of about
80
mm
(3
5
/
32
q).
Connecting the speaker cables
SURROUND
Lch
Push
r: White
s: Blue line
Speaker cable sticker (supplied)
Connector
Speaker indication
Speaker cable sticker
Connector
FRONT Lch
1
WHITE
FRONT Rch
2
RED
SURROUND Lch
3
BLUE
SURROUND Rch
4
GRAY
CENTER
5
GREEN
SUBWOOFER
6
PURPLE
SC-BTT190P_eng.book 11 ページ ２０１２年２月２０日 月曜日 午後５時５分