Hyundai HGC-310 - Manual (Page 14)

[20] [21]
BASIC FUNCTIONS
When there is an incoming call, the caller’s phone number is
displayed on the screen.
This function notifies you there is an incoming
call when you are on the phone.
When phone rings or LED blinks, press any key
except Volume Up or Down and [ ] key.
To end the call, press [ ].
l To answer the call, press [ ]
when you hear the beep.
l To switch back to the first caller,
press [ ] again.
1
1
HOW TO ANSWER CALLS
2
If you set up the AUTO ANSWER function in
advance, the call will be answered after the
selected number of rings. (Refer to page 35)
CALLER ID FUNCTION
The Caller ID number is saved in the call log.
CALL WAITING FUNCTION
BASIC FUNCTIONS
Displays the number of missed
calls.
l The message will be
cleared when you press
the [ ] or [ ] key.
1
MISSED CALL DISPLAY
Adjust volume by using the volume control keys
during the following operation.
l During a Call : Earpiece volume adjustment.
l Standby Status : Ringer volume adjustment.
l When the Phone Rings : Ringer volume
adjustment.
l Call status in hands-free : Hands-free volume
shail le nele only. Press [ ] when the
phone rings and it will mute the ringer.
1
HOW TO ADJUST VOLUME
You can adjust the volume in two ways: by using the volume
control keys on the side of the handset, or by using the menu.
VIBRATE
This function disables the ringer and vibrates the phone any
time an incoming call is in process. To enable this function
press [ ], [4],[1] and select VIBRATE or by pressing the
“up”and “down”keys at the left upper side of the phone.
MISSED
XX CALLS
PREV