Pitney Bowes K700 - Manual (Page 30)

3-6 SV61503 Rev. A
3 • Running Mail
Adding More Postage to Correct a Mail Piece
In the event that a mail piece is rated incorrectly or an incorrect post-
age value is entered for a parcel, you can add additional postage by
printing a unique Postage Correction meter stamp. Follow the steps
below.
1. Press Menu.
2. Use the Review keys to scroll and select "Change meter stamp
type?"
3. Use the Review keys to scroll and select "Add more postage to
mail piece?"
4. Enter postage amount to correct mail and press Enter/yes.
5. Slide a tape sheet into the mail deck. The postage meter prints
the digital indicia and indicates when to remove it when finished.
6. Place the additional postage tape sheet (see sample below)
somewhere on the front of the mail piece (but do not cover the
original indicia).
7. To return to Print Normal Postage mode, press Clear/Back, and
and press Yes/enter at the "Return to Printing postage?" prompt.
NOTE: Canada Post regulations stipulates that postage correction
values are not allowed within the range of the Lettermail rating struc-
ture.
Sample Corrected Postage Indicia