Pitney Bowes K700 - Manual (Page 56)

7-4 SV61503 Rev. A
7 • Ink Maintenance
Replacing the Print Head
IMPORTANT: This procedure should only be done under the direc-
tion of or with the permission of a Pitney Bowes representative.
1. Press Menu.
2. Use the Review keys to scroll and select "Use ink functions?".
3. Use the Review keys to scroll and select "Install new print
head?".
4. Open the top cover and locate print head.
5. Refer to the instructions that came with new print head to re-
move the old print head and install the new one.
6. Press Enter/yes to confirm the replacement. A print head initial-
ization occurs which lasts about 2-3 minutes.
7. When prompted, insert an envelope/tape sheet to print a test
pattern to confirm print quality.
8. If test pattern looks good, press Enter/yes.
Cleaning Printer Nozzles
Cleaning the printer nozzles may help you fix a printing problem.
1. Press Menu.
2. Use the Review keys to scroll and select "Use ink functions?".
3. Use the Review keys to scroll and select "Clean printer
nozzles?".
4. At "Clean printer nozzles?" prompt, press Enter/yes. A "Preparing
ink Please wait..." message displays as the postage meter per-
forms its cleaning.
5. When prompted, insert an envelope or tape sheet into the
postage meter.
6. At "Is test pattern OK" prompt, press Enter/yes.
7. When finished, follow prompts to return to main screen.