Planet Technology PCI Fast Ethernet Adapter ENW-9503 - Manual (Page 2)

Hardware Description
The ENW-9504 10/100 Fast Ethernet PCI Adapter has a RJ-45 connector and one
LED indicator.
LED Indicator
The adapter provides LED indicator for monitoring network conditions.
This section describes the function of LED.
LED Color Status Description
Off This card is not connect to the network.
On This card is connect to the network.
LNK/ACT Green
Blink
Indicate data is transferring and receiving via the
port.
Off This card is work with half-duplex.
Duplex Green
On This card is work with full-duplex.
This LED lights up to indicate the presence of network connection
Hardware Installation
1. Power off the PCI Local bus PC and remove its cover.
Please refer to your computer's Installation Manual for instructions on how to
remove the cover.
2. Select an available slot and plug in the adapter.
The adapter provides a 32-bit bus interface. It plugs into any available PCI bus slot
that supports Bus Master mode. Remove the bracket on the slot you've selected,
then insert the adapter into the slot. Carefully push the adapter into the slot until all
the edge connectors are firmly in place. Screw the adapter's face plate onto the
opening in the back of the computer to secure the connection. Then replace the PC's
cover.