Panasonic TQBJ0349 - Manual (Page 69)

PROJECTOR SETUP menu
ENGLISH -
69
Settings
INITIALIZE
This returns various setting values to their factory
default settings.
Press ▲▼ to select [INITIALIZE]. 1 )
Press <ENTER> button. 2 )
The [SECURITY PASSWORD] screen will be z
displayed.
Enter the password set for the 3 )
[SECURITY PASSWORD].
The [INITIALIZE] screen will be displayed. z
Press ▲▼ to select the desired 4 )
initialize item.
ALL USER
DATA
All setting values including [ENTRY
SIGNAL], [NETWORK/E-MAIL], and
[LOGO IMAGE] are returned to their
factory default values.
The projector enters a standby state
in order to reflect the setting values.
ENTRY
SIGNAL
All setting values saved for each of
the input signals are cleared.
To clear just some registered
signals, perform the procedure
described in “Deleting a registered
data” ( Æ page 71).
NETWORK/
E-MAIL
All setting values in [NETWORK
SETUP] and [E-mail setup] settings
will return to factory settings.
LOGO IMAGE
The registered image data for
[LOGO1] will return to factory
settings.
Press <ENTER> button. 5 )
The confirmation screen will be displayed. z
Press ◄► to select [OK], and press 6 )
<ENTER> button.
SERVICE PASSWORD
This function is used by a service person.