Viewfinders, Using the viewfinder – Panasonic AG-DVX100A User Manual

Page 24

Advertising
background image

24 (E)

Viewfinders

Using the viewfinder

1

Set the POWER switch on the camera
recorder to ON, and check that an image
appears in the viewfinder.

O

Keep the LCD monitor closed.

2

Position the viewfinder where its screen
images can be seen most comfortably.

O

The viewfinder can be raised
perpendicularly up to angle of about 90
degrees.

3

Adjust the diopter adjustment dial in such a
way that the characters on the viewfinder
screen come into sharp focus.

Do not point the viewfinder’s eye-piece at
the sun.
This may damage the internal parts.

This camera recorder has two viewfinders: a
viewfinder that uses a small LCD, and a 3.5-
inch LCD monitor.
Use the one that better suits the application and
the shooting conditions concerned.

O

The brightness and colour tones may differ
between the images in the viewfinder and on
the LCD monitor and the images on a TV
monitor.
Use the TV monitor when performing the final
check of the images.

Eye-piece

Diopter adjustment
dial

4

Select YES as the setting for the EVF SET
item on the setting menu DISPLAY SETUP
screen.

O

For details on the menu operations, refer
to page 38.

6

Select the EVF BRIGHTNESS item, and tilt
the OPERATION lever in the 3 or 4
direction to adjust the screen’s brightness.
(If the remote control unit is used, press the
“M” button among the SET buttons.)

5

Select the EVF COLOUR LEVEL item, tilt
the OPERATION lever in the 3 or 4
direction, and adjust the colour level of the
screen. (If the remote control unit is used,
press the “M” button among the SET
buttons.)

[–] ?? ?? ?? ?? ––––[+]

EVF BRIGHTNESS

[–] ?? ?? ?? ?? ––––[+]

EVF CONTRAST

[–] ?? ?? ?? ?? ––––[+]

PUSH MENU TO RETURN

EVF COLOUR LEVEL

EVF SET

EVF COLOUR LEVEL

[–] ?? ?? ?? ?? ––––[+]

[–] ?? ?? ?? ?? ––––[+]

EVF CONTRAST

[–] ?? ?? ?? ?? ––––[+]

PUSH MENU TO RETURN

EVF BRIGHTNESS

EVF SET

7

Select the EVF CONTRAST item, tilt the
OPERATION lever in the 3 or 4 direction,
and adjust the contrast of the screen. (If the
remote control unit is used, press the “M”
button among the SET buttons.)

EVF COLOUR LEVEL

[–] ?? ?? ?? ?? ––––[+]

EVF BRIGHTNESS

[–] ?? ?? ?? ?? ––––[+]

[–] ?? ?? ?? ?? ––––[+]

PUSH MENU TO RETURN

EVF CONTRAST

EVF SET

Advertising