Panasonic AG-DVC30P - Manual (Page 55)

55
EDITING
PHONES
DV
CAM REMOTE
PHONES
DV
CAM REMOTE
DV cable (option)
4-pin type
Connecting external units
(P48)
Headphones
(P42, P61)
Digital video equipment
O Before proceeding to connect or disconnect the DV cable (IEEE1394), be
absolutely sure to turn off the power of the units that are to be connected or
disconnected using this cable.
O
Before proceeding to connect the unit which uses a 6-pin type of DV
connector, carefully check the shape of the connectors on the DV cable and
unit. Connecting a connector upside down may damage the parts inside the
camera-recorder and cause malfunctioning.
Always connect the DV cable to the unit with the 6-pin type DV connector first.
O When recording signals from an external unit, first check that video signals are supplied.
O While signals from an external unit are being recorded, do not operate the external unit or disconnect any of
its cables. This will stop the output, which may result in the signals not being recognized when recording is
resumed.
O You can connect a digital video unit equipped with a DV connector and digitally transfer video and audio
signals as well as time codes and other information.
O
When a DV cable has been connected to the DV connector, do not apply any strong external force as this
may damage the connector.
6-pin type 4-pin type