Planar PR Line PR3020 - Manual (Page 21)

DLP® Projector – User’s Manual
Starting and Shutting down the Projector
1.
Slide the lens cover.
2.
Connect the power cord to the projector [A]
Connect the other end to a wall outlet.
Switch [B] from on (O) to off (
— )
3.
The POWER and READY LEDs on the pro-
jector turn on.
Turn on the connected devices.
4.
Ensure the Ready LED is on a steady (not
flashing) orange and then press the Power
button to turn on the projector.
The projector splash screen displays and con-
nected devices are detected.
If the connected device is a PC, press the ap-
propriate keys on the computer keyboard to
switch the display output to the projector.
(Check the user manual of the PC to deter-
mine the appropriate Fn key combination to
change display output.)
See “Setting an Access Password (Security
Lock)” on page 15 if Security Lock is en-
abled.
5.
If more than one input device is connected,
press the Source button repeatedly to switch
among devices.
(DVD and HDTV are supported through the
VGA connector.)
6.
To turn off the projector, press the Power
button. The projector prepares for shutdown
and a “Wait a moment please…” message
appears.
– 13 –