Set user session, Show default user, Show user – Perle Systems IOLAN SDS User Manual
Page 66: Show default user show user
Configuring Users
66
IOLAN SDS/SCS/STS/MDC CLI Reference Guide, Version 3.7
Set User Session
Show Default User
Show User
Description Configures a users session settings. See Set User Session
for a description
of the options.
User Level Admin
Syntax
set user .|<username>|* session 1|2|3|4|* [auto on|off]
[type off|telnet|rlogin|ssh]
set user .|<username>|* session 1|2|3|4|* telnet-options
[host <config_host>] [port <TCP_port>]
[termtype <terminal_name>] [line-mode on|off]
[map-cr-crlf on|off] [local-echo on|off]
[echo <00-7f>] [eof <00-7f>] [erase <00-7f>] [intr <00-7f>]
[quit <00-7f>]
set user .|<username>|* session 1|2|3|4|* rlogin-options
[host <config_host>] [termtype <terminal_name>]
set user .|<username>|* session 1|2|3|4|*
ssh-options [host <config_host>] [port <TCP_port>]
[termtype <terminal_name>] [protocol ssh-1|ssh-2|ssh-2/1]
[compression on|off] [verbose on|off] [auto-login on|off]
[name <string>] [password <string>]
[ssh-1-cipher 3des|des|blowfish] [authentication rsa on|off]
[authentication password on|off]
[authentication keyboard-interactive on|off]
set user .|<username>|* session 1|2|3|4|* ssh-options
ssh-2-cipher-list <3des blowfish cast aes arcfour>
Description Shows the Default Users settings.
User Level Admin
Syntax
show default user
Description Shows user configuration settings.
User Level Admin
Syntax
show user <configured_user>|.
Options
<configured_user>
Show the settings for the specified user.
.
Show the settings for the current user.