Panasonic CT-32HXC14 - Manual (Page 9)

O PTIONAL E QUIPMENT C ONNECTIONS
7 z
ENGLISH
VCR and Cable Box Connection (Cont.)
Recording a premium (scrambled) cable channel
Procedure
• Press the TV/VIDEO button and the numeric keys on the
remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
• Turn the VCR ON.
• Tune the VCR to Channel 3 or 4, depending on the
switch setting on the back of VCR.
• Using your cable box, tune to the premium cable channel
you want to record.
• Begin recording.
ˆ To view a different channel while recording:
•
Press the TV/VIDEO button and the numeric keys on the
remote control to TV mode.
• Tune the television to a program (except another
premium cable channel).
Amplifier Connection (TO AUDIO AMP)
To listen to the audio through a separate stereo system,
connect an external audio amplifier TO AUDIO AMP
outputs on back of television.
Note: TO AUDIO AMP terminals can not be connected directly
to external speakers.
Note: Rear A/V jacks diagram may vary, depending on model.
Please refer to the FEATURE CHART on page 3 for your
model’s capabilities.
Audio Adjustments
• Select SPEAKERS ON located in the onscreen AUDIO
menu.
• Set amplifier volume to minimum.
• Adjust television volume to desired level.
• Adjust amplifier volume to match the television.
• Select SPEAKERS OFF & VARIABLE AUDIO OUT from
AUDIO menu.
Note:
Variable Audio Out is not available in model
CT-27HL14.
• Volume, mute, bass, treble and balance are now
controlled through the television.
Note: Select SPEAKERS OFF & FIXED AUDIO OUT to control
audio functions through the external amplifier.
Digital TV - Set-Top Box (DTV-STB) or DVD
Connection
This television is capable of displaying 1080i and 480p DTV
signals when connected to a DTV tuner set-top-box (STB). In
order to view DTV programming, the STV must be connected
to the component video inputs (Y,PB,PR) of the television. A
DTV signal must be available in your area. Select the output of
the STB to either 1080i or 480p.
This television also utilizes a progressive scan doubler, which
de-interlaces the NTSC signal and progressively scans the
image. This allows you to sit close to the TV and not see the
thin black horizontal lines (venetian blind effect) associated
with interlaced TV pictures.
Use this diagram to connect the DTV-STB (Digital TV Set-Top-
Box) or DVD player to the back of television.
Note: Rear A/V jacks diagram may vary, depending on model.
Please refer to the FEATURE CHART on page 3 for your
model’s capabilities.
Front Control Panel
The front control panel can be used to access menus and
switch video mode when the remote control is not
available.
A second VCR, Camcorder, a video disc player, video
game equipment or DSS equipment can also be connected
to the video inputs. See the optional equipment manual for
details.
Procedure
• Connect equipment to front Audio/Video input jacks.
• Press TV/VIDEO button and the numeric keys to select
VIDEO 4 input mode.
• Operate optional equipment as instructed in equipment
manual.
S-VIDEO
COMPONENT
VIDEO INPUT
VIDEO
PROG
OUT
TO AUDIO
AMP
VIDEO
Y
P B
P R
L
R
AUDIO
DIGITAL INPUT
L
R
L
R
1 2
INPUT
1 2 3
ANT
CONNECTIONS ON BACK OF THE TV
CABLES NOT SUPPLIED
90.7 MHZ
EXTERNAL AMPLIFIER
ANT
TERMINALS ON BACK OF DTV-STB OR DVD PLAYER
R-AUDIO-L - VIDEO S-VIDEO
NTSC OUTPUT
Y P B P R MAIN
VIDEO
DIGITAL TV OUTPUT
L-AUDIO-R
TERMINALS ON BACK OF TELEVISION
CABLES NOT INCLUDED
S-VIDEO
COMPONENT
VIDEO INPUT
VIDEO
1 2 INPUT
PROG
OUT
TO AUDIO
AMP
VIDEO
Y
P B
P R
L
R
AUDIO
DIGITAL
INPUT
L
R 2 3 1
Front panel for CT-32HC14
ON/OFF INDICATOR
HPJ L - AUDIO - R VIDEO S-VIDEO
INPUT 4
TV / VIDEO VOL POWER ACTION
CH
CH
VOL
POWER ON/OFF
POWER
VOLUME CHANNEL ACTION TV/VIDEO S-VIDEO VIDEO L - AUDIO - R
INPUT 4
Front panel for CT-27HL14
Note: The ON/OFF indicator LED (red) will be lit when set
is on.