Connecting using an s-video output, Connecting for surround sound, Connecting up 02 – Pioneer BDP-LX 70 User Manual

Page 13: Digital connections, Analog connections, Av receiver

Advertising
background image

Connecting up

02

13

En

Connecting using an S-Video output

You can use the S-Video output instead of the

VIDEO OUT jack to

connect this player to your TV (or other equipment).

Use an S-Video cable (not supplied) to connect the S-VIDEO

OUT to an S-Video input on your TV, monitor or AV receiver.
Line up the small triangle above the jack with the same mark on the
plug before plugging in.

Connecting for surround sound

This player offers both analog and digital connections for surround
sound. The digital outputs (coaxial and optical) provide a convenient
way to connect this player to an AV receiver with built-in Dolby
Digital and/or DTS decoders. The 5.1ch analog outputs can be used
to connect to an AV receiver with multi-channel analog audio inputs.

Check the operating instructions that came with your AV receiver for
more on these connections.

Digital connections

Connect one of the DIGITAL AUDIO OUT jacks on this player

to a digital input on your AV receiver.

Optical connection: Use an optical cable (not supplied) to connect
the

DIGITAL AUDIO OUT OPTICAL jack to an optical input on

your AV receiver.

• When inserting the plug, the protective shutter will open and

you should hear the plug click into position when fully inserted.
Take care not to force the plug as this may damage the shutter,
the cable and/or the player.

Coaxial connection: Use a coaxial cable (not supplied) to connect
the

DIGITAL AUDIO OUT COAXIAL jack to a coaxial input on your

AV receiver.

Note

• Linear PCM audio output over the

DIGITAL AUDIO OUT jacks is

limited to 2ch, 48 kHz.

Analog connections

Connect the AUDIO OUT (5.1ch) jacks on this player to the

multi-channel analog inputs on your AV receiver.
Use a dedicated six-way cable (not supplied), or three sets of stereo
cables (not supplied) to connect the six channels.

Check carefully that each channel is connected to its corresponding
channel on the AV receiver.

After connecting, you can make settings for the number of speakers
connected to your system — see the Speakers section of the Initial
Setup menu on page 41 and Speaker Setup on page 43.

AUDIO OUT

(5.1ch)

DIGITAL AUDIO OUT

AUDIO OUT

(2ch)

CENTER

SUB WOOFER

FRONT

SURROUND

L

L

R

R

COAXIAL

OPTICAL

COMPONENT

VIDEO OUT

VIDEO OUT

LAN(10/100)

HDMI OUT

Y

S

P

B

P

R

SETTING 2

SETTING 1

IR RECEIVER

IR

CONTROL

IN

IN

S-VIDEO

IN

TV

AUDIO OUT

(5.1ch)

DIGITAL AUDIO OUT

AUDIO OUT

(2ch)

CENTER

SUB WOOFER

FRONT

SURROUND

L

L

R

R

COAXIAL

OPTICAL

COMPONENT

VIDEO OUT

VIDEO OUT

LAN(10/100)

HDMI OUT

Y

S

P

B

P

R

SETTING 2

SETTING 1

IR RECEIVER

IR

CONTROL

IN

IN

DIGITAL

AUDIO IN

COAXIAL

OPTICAL

AV receiver

AUDIO OUT

(5.1ch)

DIGITAL AUDIO OUT

AUDIO OUT

(2ch)

CENTER

SUB WOOFER

FRONT

SURROUND

L

L

R

R

COAXIAL

OPTICAL

COMPONENT

VIDEO OUT

VIDEO OUT

LAN(10/100)

HDMI OUT

Y

S

P

B

P

R

SETTING 2

SETTING 1

IR RECEIVER

IR

CONTROL

IN

IN

AUDIO IN

(5.1ch)

CENTER

SUB WOOFER

FRONT

SURROUND

L

R

AV receiver

Advertising
This manual is related to the following products: