Panasonic DMP-BD45 - Manual (Page 8)

8
VQT2H86
STEP 1 : Connecting to a TV
≥ Do not place the unit on amplifiers/receivers or equipment
that may become hot. The heat can damage the unit.
≥ Before making any connections we suggest you temporarily
disconnect all the units from AC power.
≥ Do not connect video signals through a video recorder. Due
to copy guard protection the picture may not be displayed
properly.
≥ Refer to page 33, about recommended settings for each
piece of connected equipment.
≥ [BD65] [BD45] : Please use High Speed HDMI Cables that
have the HDMI logo (as shown on the cover). It is
recommended that you use Panasonic’s HDMI cable. When
outputting 1080p signal, please use HDMI cables 5.0
meters (16.4 ft) or less.
Recommended part number:
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.),
RP-CDHS50 (5.0 m/16.4 ft.), etc.
≥ [BD655] : Do not use any other HDMI cables except the
supplied one.
Highest Quality
(VIDEO) Standard Quality
(VIDEO)
∫ Via an HDMI AV OUT terminal ∫ [BD65] [BD655] Via a
COMPONENT VIDEO OUT
terminal
∫ Via a VIDEO OUT terminal
≥ The HDMI connection supports
VIERA Link “HDAVI Control” (> 21)
when used with a compatible
Panasonic TV.
≥ Set “HDMI Video Mode”
[BD65] [BD655] and “HDMI Audio
Output” to “On” (> 27).
≥ Connect terminals of the same color.
≥ Set “Component Video Resolution” to
“480p”, “720p” or “1080i” (> 27).
≥ Set “HDMI Video Mode” to “Off”
(> 27).
≥ Connect terminals of the same color.
HDMI IN
HDMI cable
(Only included
in DMP-BD655)
COMPONENT
VIDEO IN
AUDIO IN
R L
Component
Video cable Audio/Video
cable
(included)
AUDIO IN
R L VIDEO IN
Audio/Video
cable (included)
VQT2H86~Body_eng.fm 8 ページ ２００９年１２月１１日 金曜日 午前１０時３１分