Planet Technology PL-103E - Manual (Page 18)

14
• Enter “E:\Utility\PL-103E\powerlineadapter.exe” in the appeared box, where
“E” is the letter of your CD-ROM drive.
• Click on “OK” button.
3. The utility will be installed into your computer and a new icon called
“Powerline
Configuration ” will appear on your desktop.
5.2 Using the Powerline Configuration Utility
1. Double click the Powerline Configuration icon shown on your desktop.
The Device tab shows the MAC address of your Powerline device
connected to your computer. If you have installed more than two Powerline
devices, select the preferred one and click Connect to access your
network. Click Refresh whenever you add or eliminate Powerline devices.
The Link Quality depends on the site ’s power circuit condition, power
stability, etc.