Panasonic 4520 - Manual (Page 30)

30
Making Copies
Basic Menu
■ Copying the Same Size Originals (1:1)
Copy size is automatically selected.
100%
If set in other
function mode
or
If original size
is not detected
NOTE
● During the copy operation and after making copies, the fan motor may start spinning. This is a
normal operation and is used to cool down the copier.
1 2
■ Position of the original(s)
On the i-ADF On the Platen
■ Using the ADF
Originals that cannot be used
●
Post Cards, Drawing Papers, Transparencies,
Labelling Papers, Heavyweight Papers, Thin Art
Papers, Film Thermal Papers
Inappropriate Originals
●
Paper with a smooth surface such as glossy and
coated papers
● Transparencies
● Originals with a Lead Edge that is ripped, creased,
folded, punched, or glued.
● Mixed width size Originals (except a combination of
Ledger and Letter)
● Paste-ups
● Pressure sensitive or carbon backed papers
● Paper with excessive curl
● Stapled originals
● Freshly printed copies from a laser printer
● Originals with fresh White-Out (Liquid paper
correction fluid)
ADF
Upper Limit
Indicator
Set the originals up to the upper limit indicator
ADF Tray
Original Guides
Adjust to the original’s width
Note 1) Once after setting originals , pressing Start button, do not press originals as it may cause original jam.
Note 2) When originals with clipped or stapled, take off clips or staples, then set originals neat.