Pioneer DEQ-P9 - Manual (Page 17)

Effective distance Adjustment Using the Position Fine Tuning function
— Relation to Time Alignment Adjustment function —
When the system comprises a multi-amp system, the distance between the listening posi-
tion and each speaker can be tuned using either of two methods.
Time Alignment Adjustment function of the Network Menu (page 25)
The distance between the listening position and each speaker of each band (high, mid, low
and subwoofer) can be adjusted for the left and right speakers.
Distance tuning of the Position Fine Tuning function
The distance between the listening position and the left and right speakers can be tuned,
regardless of the band. The same tuning is conducted for high, mid and low range bands.
With a multi-amp system, combine the two methods to ensure the position of the sound
images are set up more effectively.
Adjusting distance using the Position Fine Tuning function
• When the display has switched to Time Alignment Adjustment Screen after adjusting the distance
between the listening position and each speaker using the Position Fine Tuning function, the values
set using the Position Fine Tuning function will be added to the values created using the Time
Alignment Adjustment function and the sum of the values displayed.
• To store the displayed values in memory as new values for the Time Alignment Adjustment
function (standard values for the Position Fine Tuning function), adjust any one value again, using
the
5/∞ buttons. The displayed values will be stored in memory and the distance between the lis-
tening position and each speaker set using the Position Fine Tuning function will be reset and
returned to 0.
When the distance has been using the Time Alignment Adjustment function
• The distance adjustment of the Position Fine Tuning function uses the distance adjustment of the
Time Alignment Adjustment function as its basis. If the distance is reset using the Time Alignment
Adjustment function, this standard value is changed. When this happens, any distance adjustment
previously set using the Position Fine Tuning function is reset to 0.
3. Use the Position Fine Tuning Function to adjust the overall level balance
between the left and right speakers.
Adjust the difference in sound levels between the left and right speakers so that the
sound image is in the front.
2. Adjust the overall distance from the left and right speakers using the
Position Fine Tuning Function.
Use the set values for the Time Alignment Adjustment function to fine tune the overall
balance of the sound image positions.
1. Adjust the distance from each speaker using the Time Alignment
Adjustment function of the Network Menu (refer to page 25).
16
ENGLISH
ESPA
Ñ
OL
DEUTSCH
FRAN
Ç
AIS
ITALIANO
NEDERLANDS