Pioneer DEQ-P9 - Manual (Page 22)

21
Audio Adjustment <Equalizer>
Adjusting the 31 Band Graphic Equalizer <FINE> (Open state)
Adjustable frequency : 20 Hz — 20 kHz (Every 1/3 octaves, total 31 bands)
Level adjustment range: –12 dB — +12 dB (0.5 dB/1 step)
Note:
• If you selected LR/COM mode (refer to page 7), you can’t switch between left and right channel. In
this case, <FRT> is displayed and the equalizer setting of left and right channel go to the same.
When completing the adjustment
• It is recommended that adjustment settings be stored in memory soon after the adjustments are
completed. Refer to page 34 for Memory operations.
6. Switch between right and left to set up the equalizer curve.
Repeat steps 2–5 to set up equalizer curves for the left and right speakers separately.
5. Adjust the other bands.
Repeat steps 3 and 4 to adjust to the desired sound.
4. Press the
5/∞ buttons and
adjust the level.
3. Press the
2/3 buttons and select
the desired band (frequency) to
be adjusted.
2. Press the FUNCTION button 2
and select left or right channel.
(Only for LR/IND mode.)
Each press the FUNCTION button 2
switches left and right channel.
1. Open the cover of the remote
controller in the Equalizer Menu
(refer to page 4).
This switches to Equalizer Menu
Setting Screen.