Snmp management capabilities, Management information base (mib) support, Snmp trap support – Paradyne Hotwire ATM Line Cards 8385 User Manual
Page 13
1. About the Hotwire ATM Line Cards
8335-A2-GB20-70
February 2003
1-5
SNMP Management Capabilities
The Hotwire ATM Line Cards support SNMP Version 1, and can be managed by
Paradyne’s OpenLane
®
or any industry-standard SNMP manager.
Management Information Base (MIB) Support
For a detailed description of supported MIBs, visit Paradyne’s Web site at
www.paradyne.com. The following MIBs are supported:
ATM Forum SNMP M4 Network Element View (af-nm-0095.001)
Definitions of Managed Objects for the ADSL Lines (RFC 2662)
Definitions of Managed Objects for ATM Management (RFC 2515)
Definitions of Managed Objects for HDSL2 and SHDSL Lines
(draft-ietf-adslmib-hdsl2-10.txt)
Definitions of Textual Conventions and OBJECT-IDENTITIES for ATM
Management (RFC 2514)
Evolution of MIB II Interfaces (RFC 2863)
ADSL Extension MIB (Model 8365 only) (draft-ietf-adslmib-adslext.txt)
SHDSL MIB (Model 8385 only) (draft-ietf-adslmib-hdsl2.txt)
Entity MIB Using SMIv2 (RFC 2037)
MIB II and the Interfaces Group MIB (RFC 1213, RFC 2233)
Paradyne enterprise MIBs for:
— Hotwire xDSL Interface
— SLE Device Control
— SLE Device Health and Status
— MaxVciVpi-MIB Table
— IF-MIB Table
— ATM VPL Statistics Table
SNMP Trap Support
The Hotwire ATM Line Cards support SNMP traps as shown in
.