Paradyne Hotwire ATM Line Cards 8385 - Manual (Page 38)

3. Configuration
3-16 February 2003 8335-A2-GB20-70
DSL Port Configuration – Model 8365
For the Model 8365, the following DSL Port Configuration screen appears.
Procedure
To enter DSL Port Configuration screen information for the Model 8365:
1. Select an Action:
Edit – To edit fields on the screen.
Reset – To enable the port and cause the DSL line to retrain.
2. Select the Port Name of the port to be configured or reset (dsl1 through
dsl12).
3. For Edit mode, position the cursor in the field you wish to modify. Type the
value you want and press Enter.
For . . . Enter . . .
Line Code The physical transport method (Default = Multimode):
Multimode – The line card adapts to the code the endpoint
is set for.
DMT – The line code is G.dmt (ITU 992.1). The endpoint
must be set to G.dmt.
G.Lite – The line code is G.lite (ITU 992.2). The endpoint
must be set to G.lite.
ANSI – The line code is ANSI T1.413, Issue 2. The endpoint
must be set to ANSI.