Rj-45 shielded 10/100 ethernet port, Rj-45 non-shielded rs-232 console port (eia-561), Ethernet port (mdi-x switch in out position) – Patton electronic PATTON 2603 User Manual
Page 125: Rs-232 control port
Advertising
RJ-45 shielded 10/100 Ethernet port
125
Models 2603, 2621, and 2635 Getting Started Guide
D • IPLink Physical Connectors
RJ-45 shielded 10/100 Ethernet port
Assuming the MDI-X switch is in the out position.
RJ-45 non-shielded RS-232 console port (EIA-561)
The RS-232 serial control port of the IPLink is configured to operate as a DCE.
Table 7. Ethernet Port (MDI-X switch in out position)
Pin No.
Signal Name
Direction
1
TX+
from IPLink
2
TX-
from IPLink
3
RX+
to IPLink
4
5
6
RX-
to IPLink
7
8
Table 8. RS-232 Control Port
Pin No. Signal Name
Direction
1
DSR
from IPLink
2
CD
from IPLink
3
DTR
to IPLink
4
Signal Ground
-
5
RD
from IPLink
6
TD
to IPLink
7
CTS
from IPLink
8
RTS
to IPLink
Advertising
This manual is related to the following products: