Patton electronic PATTON 2603 - Manual (Page 98)

Alarm 98
Models 2603, 2621, and 2635 Getting Started Guide 10 • System Configuration
• creating a Username
• defining the Password
• give the user ability to configure the IPLink or read-only authority
• add a comment useful to the administrator
Figure 69. Creating new user
Alarm
Access the configuration and status of the alarms.
Figure 70. Alarm Management web-page
All IPLinks have the ‘PP over Threshold’ and ‘NP over Threshold’ alarms. The Model 2603 has additional
alarms for the T1/E1 WAN port. An alarm can be tested by clicking on the Generate button. Similarly, by
clicking on the Clear button, the alarm is cleared, that is, turned off, however the Time and Count parameters