Sound control, Each source, Radio – Panasonic CQ-C9801U User Manual
Page 11: English
CQ-C9901U/C9801U/C9701U
Radio
Sound Control
Radio
English
21
20
Sound Control
CQ-C9901U/C9801U/C9701U
1
Press [SRC] (Source) to select the
radio mode.
2
Press [BAND] to select a band.
Notes:
¡
For tuning in on only stations whose receiving condi-
tions are good in the station search, set LOCAL to ON.
(
a
page 23)
¡
For reducing noise when a receiving FM stereo wave
is weak, set MONO to ON. (
a
page 23)
3
Select a station.
Frequency adjustment
[]] (TUNE):
Lower
[[] (TUNE):
Higher
Note: Hold down for 0.5 sec. or more and release
for station search.
Preset station selection
[{] (P·SET: Preset):
Lower preset number
[}] (P·SET: Preset):
Higher preset number
Note:
¡
Direct Access can be executed with [1] to [6]
buttons on remote control.
¡
Stations in FM 1 to 3 are sequentially selectable
without changing bands when “ALL BAND” is
selected in “AUTO PRESET”.
Band
Frequency
Lights when LOCAL is
activated.
(
a
page 23)
Radio mode display
Preset Number
Lights while receiving an FM stereo signal.
(“STEREO”: CQ-C9801U, CQ-C9701U)
Lights when MONO is activated.
(
a
page 23)
Operation Flow
SRC
CS
SRC
Indicates the intensity of
the radio wave.
A radio DSP is integrated into this unit. The IF filter allows the radio to adjust the bandwidth automatically to maintain optimum
reception.
SOUND QUALITY Menu display
You can make a fine adjustment of SQ and Position.
1
Set the SQ mode to on.
2
Hold down [CS] (SQ) for 2 sec. or more
to display the audio menu display.
3
Press [
}
] or [
{
] to select a function to
be adjusted.
4
Press [BAND]
(SET) to adjust.
5
Adjust the setting value.
[}][{][]][[
]
: Select
[BAND] (SET):
Confirm
6
Press [DISP] to confirm the adjustment.
SQ PRESET SELECT
Select your favorite type from 6 kinds of SQ Presets.
Note: You can also select the SQ preset number by
pressing [1] to [6] on the remote control.
SQ ADJUSTMENT (SQ9)
You can make a fine adjustment to the currently selected
SQ presetting in each type (except FLAT).
[
]
][
[
]:
Frequency band
selection
qw:
Frequency selection
[
}
][
{
]: Level up/down
Note: If you hold down [BAND] for 2 sec. or more, the
presetting that is called up can be turned into the default.
SQ PRESET MEMORY
The current value is assigned to one of SQ preset 2 to 6.
1
Select a preset number by pressing
[}],
[{], []]
or
[[]
.
2
Hold down
[BAND]
for 2 sec. or more.
Note: You can also select the SQ preset number by
pressing [2] to [6] on the remote control, and assign the
current value to the selected preset number by holding
down the same button for 2 sec. or more.
POSITION
You can make the optimal sound field in accordance with
your seat.
SRC
CS
CS