Pride Mobility Quantum 614 3S - Manual (Page 41)

Quantum 614 Series www.pridemobility.com 41
A P P E N D I X I - S P E C I F I C A T I O N S
1 Varies with base model, user weight, terrain type, battery amp hour rating (Ah), battery charge, battery condition, motors, controller
type, tire type, and tire condition. This specification can be subject to a variance of (+ or -) 10%.
2 Due to manufacturing tolerances and continued product improvement, this specification can be subject to a variance of (+ or – ) 3%.
3 AGM or Gel-Cell type required. See VI. “Batteries and Charging.”
4 Tested in accordance with ASNI/RESNA, WC Vol 2, Section 4 and ISO 7176-4 standards. Results derived from theoretical calcu-
lation based on battery specifications and drive system performance. Test conducted at maximum weight capacity.
NOTE: The product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176 series EN12184
standards. All specifications subject to change without notice.
SPECIFICATIONS
Suspension ATX Suspension (Active-Trac with extra stability)
Drive Wheels 14 in. (35.56 cm), pneumatic or solid available
Caster Wheels 6 in. (15.24 cm), solid (front and rear)
Maximum Speed 1 Up to 5 mph (8 km/h)
Brakes “Intelligent Braking” electronic regenerative, disc park brake
Ground Clearance 2 See figure 24.
Turning Radius 2 See figure 24.
Overall Size 2
Length: See figure 24.
Width: See figure 24.
Drivetrain Two motor, mid-wheel drive
Batteries 3 Two 12-volt, deep-cycle NF-22 batteries
Range 1,4
Variable up to 13 miles (20.92 km)
Battery Charger
5-amp, off-board (standard)
8-amp, off-board (optional)
Weight Capacity 300 lbs. (136 kg)
Component Weights 2
Base: 121.5 lbs. (55.11 kg)
Batteries: 38 lbs. (17.23 kg) each