Pioneer SUPERTUNERIIID+ AVH-P7850DVD - Manual (Page 104)

% Touch DVD DISC AUTO on the initial
menu to turn automatic disc playback on.
# To turn automatic disc playback off, touch
DVD DISC AUTO again.
Resetting the audio functions
You can reset all audio functions except vo-
lume.
Important
If you perform this operation, audio settings are
erased. For this reason, we recommend that you
record the settings in the sheet on page 121 after
you have completed audio adjustments.
1 Touch AUDIO RESET on the initial
menu.
2 Touch RESET.
Proceed with reset? appears and asks you to
confirm it.
3 Touch RESET again to reset audio func-
tions.
Reset completed is displayed and the audio
settings are reset.
# To cancel resetting the audio functions, touch
CANCEL.
Switching the DSP setting
mode
This unit features two operation modes: the
network mode and the standard mode. You
can switch between modes as desired. Initi-
ally, the DSP setting is set to the standard
mode.
! Switching the DSP mode erases the cur-
rent adjusting audio settings
( LAST MEMORY). If needed, memorize it
into custom settings ( CUSTOM1,
CUSTOM2 or CUSTOM3).
1 Touch DSP MODE on the initial menu.
2 Touch either of the following touch
panel keys to select the desired mode.
! STANDARD – Standard mode
! NETWORK – Network mode
3 Touch CHANGE to change the mode.
# To cancel changing the mode, touch
CANCEL.
Setting the optical input
When connecting a DVD player, select S-DVD.
% Touch OPTICAL INPUT on the initial
menu to select the optical input setting.
Touch
OPTICAL INPUT until the desired set-
ting appears in the display.
! OFF – No DVD player is connected
! S-DVD – DVD player/multi-DVD player
Setting the TV signal
When this unit is connected to a TV tuner, you
need to adjust the TV signal suitable to your
country TV signal setting.
! This function is initially set to AUTO so that
this unit automatically adjusts the TV signal
setting.
% Touch TV FORMAT on the initial menu
to select an appropriate TV signal.
Touching
TV FORMAT switches TV signal set-
tings in the following order:
AUTO
—PAL—NTSC—PAL-M—SECAM
Initial Settings
En
104
Section
20