Pioneer SUPERTUNERIIID+ AVH-P7850DVD - Manual (Page 109)

Using the AUX source
This unit can control an auxiliary equipment
such as VCR or portable device (sold sepa-
rately). When connected, auxiliary equipment
is automatically read in as AUX source and as-
signed to
AUX.
About AUX connection method
You have two methods to connect auxiliary
equipment to this unit.
Stereo mini pin plug cable
When connecting auxiliary equipment using a
stereo mini plug cable
% Insert the stereo mini plug into the mi-
crophone/auxiliary input jack on this unit.
For more details, refer to the installation man-
ual.
IP-BUS-RCA interconnector
When connecting auxiliary equipment using an
IP-BUS-RCA Interconnector (sold separately)
% Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separetely)
to connect this unit to auxiliary equipment
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner
’s manual.
# You can only make this type of connection if
the auxiliary equipment has RCA outputs.
Selecting AUX as the source
% Touch the source icon and then touch
AUX1/AUX2 to select AUX as the source.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 103.
Setting the AUX title
The title displayed for the AUX source can be
changed.
! Each title can be up to 10 characters long.
1 After you have selected AUX as the
source, touch AV MENU and FUNCTION and
then touch NAME EDIT.
2 Touch the letter you wish to input.
For details concerning operation, refer to Edit-
ing the name of sound settings on page 92.
Using the PGM button
You can operate the preprogrammed functions
for each source by using
PGM.
% Press PGM to turn pause on when se-
lecting the following sources:
! DVD – Built-in DVD player
! S-DVD – DVD player/multi-DVD player
! M-CD – Multi-CD player
! iPod – iPod
! BT AUDIO – Bluetooth Audio
# To turn pause off, press PGM again.
% Press PGM and hold to turn BSM on
when selecting FM or AM as the source.
Press
PGM and hold until the BSM turns on.
# To cancel the storage process, press PGM
again.
% Press PGM and hold to turn BSSM on
when selecting TV as the source.
Press
PGM and hold until the BSSM turns on.
# To cancel the storage process, press PGM
again.
Other Functions
En
109
Section
21
Other
Functions