Adjusting 13-band graphic equalizer, Audio adjustments – Pioneer SUPERTUNERIIID+ AVH-P7850DVD User Manual

Page 86

Advertising
background image

# You can adjust parameters for each band of
the other speakers in the same way.

Note

You can store the adjusted setting in memory by
using

MEMORY. For details concerning opera-

tion, refer to Storing the adjusted audio settings in
memory on page 91.

Adjusting 13-band graphic
equalizer

For custom equalizer curves (

CUSTOM1 to

CUSTOM3), you can adjust the level of each
band.

! A separate CUSTOM1 curve can be cre-

ated for each source.

! CUSTOM2 and CUSTOM3 curves can be

created common to all sources.

1

Touch ADJ. next to GRAPHIC EQ on the

sound setting menu.

2

Touch LR Common/LR Independent to

switch the equalizer adjustment method.

! LR Common – Adjusts left and right speak-

ers simultaneously.

! LR Independent – Adjusts left and right

speakers separately.

3

Touch EQ to select the equalizer.

Touch

EQ repeatedly to switch between the fol-

lowing equalizers:
POWERFUL

—NATURAL—VOCAL—FLAT—

CUSTOM1

—CUSTOM2—CUSTOM3—

LAST MEMORY

—SUPER BASS (S. BASS)

# You can also select the equalizer by using
EQUALIZER LIST.

# To close the equalizer curve list, touch CLOSE.
# You can select LAST MEMORY only when the
adjusted equalizer curve is not memorized in this
unit.

4

Touch

or

next to SPEAKER to select

the speaker to be adjusted.
Touch

or

until the desired speaker appears

in the display.
LEFT (left speakers)

—RIGHT (right speakers)

# You can mute the selected speaker units by
touching . To cancel muting, touch

.

5

Touch

or

to select the equalizer

band to be adjusted.
Touch

or

until the desired equalizer band

appears in the display.
50

—80—125—200—315—500—800—1.25k

—2k—3.15k—5k—8k—12.5k (Hz)

6

Touch

or

to adjust the level of the

equalizer band.
Each time you touch

or

it increases or

decreases the level of the equalization band.
+12dB

– –12dB is displayed as the level is in-

creased or decreased.

# When you adjust the speaker loudness with
selecting

LR Common, the equalizer levels of

both side speakers are changed simultaneously.
Thus, if the equalizer level of one speaker is at
maximum or minimum, the level of the other
speaker is at full limit in opposite direction.

# You can then select another band and adjust
the level.

Note

You can store the adjusted setting in memory by
using

MEMORY. For details concerning opera-

tion, refer to Storing the adjusted audio settings in
memory on page 91.

Audio Adjustments

En

86

Section

17

Advertising