Using the time alignment, Adjusting the time alignment, Audio adjustments – Pioneer SUPERTUNERIIID+ AVH-P7850DVD User Manual

Page 89: Recalling time alignment settings

Advertising
background image

Parameter

What it does

Selects slopes in the following order:
+18

— +12— +6 (dB/oct.)

To switch the filter of the front speaker between LPF and
HPF, touch

HIGH or LOW.

When front speaker LPF is selected in the
network mode

Parameter

What it does

FREQUENCY

Selects cut-off frequencies in the fol-
lowing order:
1.25k

—1.6k—2k—2.5k—3.15k—4k

—5k—6.3k—8k—10k—12.5k (Hz)

SLOPE

Selects slopes in the following order:
–12— –6—0 (pass) (dB/oct.)

# You can mute the selected speaker unit by
touching

MUTE OFF. To cancel muting, touch

MUTE ON.

Notes

! Selecting cut-off frequencies sets cut-off fre-

quencies of the subwoofer

’s L.P.F. (low-pass

filter) and that of the

SMALL speaker H.P.F.

(high-pass filter). The cut-off frequency setting
has no effect if the subwoofer is set to

OFF

and other speakers are set to

LARGE or OFF.

! If trying to boost the bass output of the sub-

woofer doesn

’t do much or rather makes you

feel that the bass gets more murky, this may
indicate that the subwoofer

’s output and bass

content you hear over other speakers cancel
each other out. To remove this problem, try
changing the phase setting for the subwoofer.

! You can store the adjusted setting in memory

by using

MEMORY. For details concerning op-

eration, refer to Storing the adjusted audio set-
tings in memory on page 91.

Using the time alignment

The time alignment lets you adjust the dis-
tance between each speaker and the listening
position.

Recalling time alignment settings

% Touch TIME ALIGNMENT on the sound
setting menu to select the time alignment.
Touch

TIME ALIGNMENT repeatedly to switch

between the following time alignment set-
tings:
INITIAL

—AUTO—CUSTOM1—CUSTOM2—

CUSTOM3

—LAST MEMORY—OFF

# You can select LAST MEMORY only when the
adjusted time alignment setting is not memorized
in this unit.

# You cannot select AUTO when NETWORK
has been selected. (Refer to Switching the DSP
setting mode on page 104.)

# When STANDARD has been selected, you
cannot select

AUTO if auto TA and EQ has not

been carried out.

Adjusting the time alignment

You can adjust the distance between each
speaker and the selected position.

! An adjusted time alignment can be memor-

ized in

CUSTOM1, CUSTOM2 or

CUSTOM3.

1

Recall the time alignment setting you

want to adjust.
Refer to Recalling time alignment settings on
this page.

2

Touch ADJ. next to TIME ALIGNMENT

on the sound setting menu.

# You cannot adjust the time alignment when
neither

FRONT LEFT nor FRONT RIGHT is se-

lected in the position selector mode.

Audio Adjustments

En

89

Section

17

Audio

Adjustments

Advertising