Pioneer SUPERTUNERIIID+ AVH-P7850DVD - Manual (Page 96)

! After you set up the rear view camera set-
ting, move the gear shift in REVERSE (R)
and confirm if a rear view camera video
can be shown on the display.
! If the display should be switched to a rear
view camera video by error while you are
driving forward, change the rear view cam-
era setting.
! To end watching a rear view camera video
and return to the source display, press
V.ADJUST.
1 Touch AV INPUT 2 on the setup menu to
select B.UP CAMERA.
2 Touch B. CAMERA POLARITY on the
setup menu to select an appropriate set-
ting for polarity.
Each time you touch
B. CAMERA POLARITY it
switches between the following polarity:
! BATTERY – When the polarity of the con-
nected lead is positive while the gear shift
is in REVERSE (R) position
! GROUND – When the polarity of the con-
nected lead is negative while the gear shift
is in REVERSE (R) position
Setting the automatic open
function
To prevent the display from hitting the shift
lever of an automatic vehicle when it is in
P
(park) position, or when you do not wish the
display to open/close automatically, you can
set the automatic open function in the manual
mode.
% Touch AUTO FLAP on the setup menu
to select the display to open/close automa-
tically or manually.
Each time you touch
AUTO FLAP it switches
between the following settings:
! AUTO – The LCD panel will be opened or
closed automatically with the turning of the
ignition switch on or off
! MANUAL – You have to press
OPEN/CLOSE to open/close the LCD
panel
Adjusting the LCD panel
slide position
You can adjust the LCD panel slide position so
that the panel is set back or forward.
% Touch FLAP SET BACK on the setup
menu to turn the set back on.
The LCD panel slides to the back.
# Touch FLAP SET BACK again to turn the set
back off and the LCD panel slides to the front.
Setting the clock
Use these instructions to set the clock.
1 Touch CLOCK ADJUSTMENT on the
setup menu.
2 Touch 0
—9 to set the clock.
# To cancel the inputted numbers, touch C.
3 Touch ENTER.
Note
Touching 24h/12h switches the clock display on
the sub-display between 12/24-hour formats.
Setup
En
96
Section
18